Home | About us | Editorial board | Search | Ahead of print | Current issue | Archives | Submit article | Instructions | Subscribe | Contacts | Advertise | Login 
  Official website of M M University Mullana      
   
ARTICLE
Year : 2011  |  Volume : 1  |  Issue : 2  |  Page : 94-99

Effect of L/D Ratio on the Performance of an Inverted Three-lobe Pressure Dam Bearing


1 Maharishi Markendeshwar Engineering College, Ambala (Haryana), India
2 National Institute of Technology, Kurukshetra (Haryana), India

Correspondence Address:
N K Batra
Maharishi Markendeshwar Engineering College, Ambala (Haryana)
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/0976-8580.86641

Rights and Permissions

An inverted three-lobe pressure dam bearing which is produced by cutting a pressure dams on the upper lobe and two relief-tracks on the lower two lobes of an ordinary inverted three-lobe bearing is found to be more stable than an inverted three-lobe bearing. In this paper an inverted three-lobe pressure dam bearing supporting rigid and flexible rotors is analytically investigated to determine its performance when L/D ratio is varied in the range 0.8-1.5. The static and dynamic characteristics are studied at various L/D ratios. The results show that the stability of an inverted three-lobe pressure dam bearing increases with decrease in L/D ratios both for rigid as well as flexible rotors.


[FULL TEXT] [PDF]*
Print this article     Email this article
 Next article
 Previous article
 Table of Contents

 Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
 Citation Manager
 Access Statistics
 Reader Comments
 Email Alert *
 Add to My List *
 * Requires registration (Free)
 

 Article Access Statistics
    Viewed3556    
    Printed211    
    Emailed0    
    PDF Downloaded435    
    Comments [Add]    
    Cited by others 1    

Recommend this journal