1 |
Metallographic Analysis of Pure Titanium (Grade-2) Surface by Wire Electro Discharge Machining (WEDM) |
|
|
| Anish Kumar, Vinod Kumar, Jatinder Kumar |
|
| Journal of Machinery Manufacturing and Automation. Mar. 2013; 2(1): 1-5 |
|
| [HTML Full text] [Google Scholar] |
|
2 |
Influence of near dry wirecut electrical discharge machining parameters on kerf width in Monel 400 |
|
|
| N.E. Arun Kumar,N. Sathishkumar,E. Raviraj,M. Pathri Narayanan,Roderik Eugene |
|
| Materials Today: Proceedings. 2020; |
|
| [Google Scholar] [DOI] |
|
3 |
INVESTIGATION OF MACHINABILITY OF WELDED JOINTED HARDOX STEEL IN WEDM |
|
|
| MEHMET ALTUG |
|
| Anadolu University Journal of Science and Technology-A Applied Sciences and Engineering. 2019; |
|
| [Google Scholar] [DOI] |
|
4 |
Study of the reuse potential of the sisal fibers powder as a particulate material in polymer composites |
|
|
| Kátia Moreira de Melo,Thiago Felix dos Santos,Caroliny Minely da Silva Santos,Rubens Tavares da Fonseca,Nestor Dantas de Lucena,José Ivan de Medeiros,Marcos Silva de Aquino |
|
| Journal of Materials Research and Technology. 2019; |
|
| [Google Scholar] [DOI] |
|
5 |
An experimental parametric analysis on performance characteristics in wire electric discharge machining of Inconel 718 |
|
|
| K Venkatarao,T Anup Kumar |
|
| Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2019; 233(14): 4836 |
|
| [Google Scholar] [DOI] |
|
6 |
Parameter study and optimization of WEDM process: A Review |
|
|
| Md Ehsan Asgar,Ajay Kumar Singh Singholi |
|
| IOP Conference Series: Materials Science and Engineering. 2018; 404: 012007 |
|
| [Google Scholar] [DOI] |
|
7 |
Effect of Width of Kerf on Machining Accuracy and Subsurface Layer After WEDM |
|
|
| K. Mouralova,J. Kovar,L. Klakurkova,T. Prokes |
|
| Journal of Materials Engineering and Performance. 2018; |
|
| [Google Scholar] [DOI] |
|
8 |
Investigation of Hardox 400 Steel Exposed to Heat Treatment Processes in WEDM |
|
|
| Mehmet Altug |
|
| Journal of Polytechnic. 2018; |
|
| [Google Scholar] [DOI] |
|
9 |
A Study of Microstructure and Tribological Properties of Stir Cast Al Metal Matrix Composite |
|
|
| V. Jaya Prasad,N. Mohan Rao,S. Kamaluddin |
|
| Materials Today: Proceedings. 2017; 4(8): 9264 |
|
| [Google Scholar] [DOI] |
|
10 |
Comparison of optimized settings for cryogenic-treated and normal D-3 steel on WEDM using grey relational theory |
|
|
| Rajesh Khanna,Hari Singh |
|
| Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2016; 230(1): 219 |
|
| [Google Scholar] [DOI] |
|
11 |
Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory |
|
|
| Rajesh Khanna,Anish Kumar,Mohinder Pal Garg,Ajit Singh,Neeraj Sharma |
|
| Journal of Industrial Engineering International. 2015; 11(4): 459 |
|
| [Google Scholar] [DOI] |
|
12 |
Modeling and control of a quadrotor with variable geometry arms |
|
|
| Gabriele Barbaraci |
|
| Journal of Unmanned Vehicle Systems. 2015; 3(2): 35 |
|
| [Google Scholar] [DOI] |
|
13 |
Investigation of mechanical, microstructural, and machining properties of AISI 420 martensitic stainless steel welded by laser welding |
|
|
| Mehmet Erdem,Mehmet Altug,Mustafa Karabulut |
|
| The International Journal of Advanced Manufacturing Technology. 2015; |
|
| [Google Scholar] [DOI] |
|
14 |
Experimental investigation of kerf of Ti6Al4V exposed to different heat treatment processes in WEDM and optimization of parameters using genetic algorithm |
|
|
| Mehmet Altug,Mehmet Erdem,Cetin Ozay |
|
| The International Journal of Advanced Manufacturing Technology. 2015; |
|
| [Google Scholar] [DOI] |
|
15 |
Hydrothermal Extraction of a-Fe2O3 nanocrystallite from hematite ore |
|
|
| N.M. Khalil,M.M.S. Wahsh,Elhadi E. Saad |
|
| Journal of Industrial and Engineering Chemistry. 2014; |
|
| [Google Scholar] [DOI] |
|
16 |
Design of Methane Hydrate Inhibitor Molecule Using Density Functional Theory |
|
|
| S. Pal,T. K. Kundu |
|
| Journal of Cluster Science. 2014; |
|
| [Google Scholar] [DOI] |
|
17 |
Modelling the WEDM Process Parameters for Cryogenic Treated D-2 Tool Steel by Integrated RSM and GA |
|
|
| Neeraj Sharma,Ajit Singh,Renu Sharma,Renu Deepak |
|
| Procedia Engineering. 2014; 97: 1609 |
|
| [Google Scholar] [DOI] |
|
18 |
Modeling and Parametric Investigation of WEDM for D-2 Tool Steel Using RSM and GA |
|
|
| Neeraj Sharma, Neeraj Ahuja, Sorabh Gupta, Ajit Singh, Renu Sharma |
|
| Applied Mechanics and Materials Vols. 2014; 292-294: 511-515 |
|
| [Google Scholar] [DOI] |
|
19 |
Material Removal Rate, Electrode Wear Rate, and Surface Roughness Evaluation in Die Sinking EDM with Hollow Tool through Response Surface Methodology |
|
|
| Teepu Sultan,Anish Kumar,Rahul Dev Gupta |
|
| International Journal of Manufacturing Engineering. 2014; 2014: 1 |
|
| [Google Scholar] [DOI] |
|
20 |
Improving the Demulsification Process of Heavy Crude Oil Emulsion through Blending with Diluent |
|
|
| K. K. Salam,A. O. Alade,A. O. Arinkoola,A. Opawale |
|
| Journal of Petroleum Engineering. 2013; 2013: 1 |
|
| [Google Scholar] [DOI] |
|
21 |
Crashworthiness design of multi-component tailor-welded blank (TWB) structures |
|
|
| Fengxiang Xu,Guangyong Sun,Guangyao Li,Qing Li |
|
| Structural and Multidisciplinary Optimization. 2013; 48(3): 653 |
|
| [Google Scholar] [DOI] |
|
22 |
|
|
|
| |
|
| International Journal of Contemporary Practices. 2013; 2(3): 54-63 |
|
| | [PDF] [Google Scholar] [DOI] |
|
23 |
Crashworthiness design of multi-component tailor-welded blank (TWB) structures |
|
|
| Fengxiang Xu, Guangyong Sun, Guangyao Li, Qing Li |
|
| Struct Multidisc Optim. 2013; (April): 1-15 |
|
| | [PDF] [Google Scholar] [DOI] |
|
24 |
Wire electrical discharge machining of AA7075/SiC/Al2O3 hybrid composite fabricated by inert gas-assisted electromagnetic stir-casting process |
|
|
| Shyam Lal, Sudhir Kumar, Z. A. Khan, A. N. Siddiquee |
|
| Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2013; |
|
| [Google Scholar] [DOI] |
|
25 |
Active magnetic bearing design study |
|
|
| Gabriele Barbaraci,Gabriele Virzě Mariotti,Alessio Piscopo |
|
| Journal of Vibration and Control. 2013; 19(16): 2491 |
|
| [Google Scholar] [DOI] |
|
26 |
Performance Evaluation of Wedm Machining on Incoloy800 by“TAGUCHI Method” |
|
|
| Gagan Goyal,Ashok Choudhary |
|
| International Journal of Latest Trends in Engineering and Technology (IJLTET). ; 2(4): 93-99 |
|
| | [PDF] [Google Scholar] [DOI] |
|