1 |
Prediction of the Geometrical Accuracy of the Machined Surface of the Tool Steel EN X30WCrV9-3 after Electrical Discharge Machining with CuZn37 Wire Electrode |
|
| | Luboslav Straka,Ivan Cornư,Ján Pitel | | | Metals. 2017; 7(11): 462 | | | [Google Scholar] [DOI] | | 2 |
Process Parameter Optimization for MRR and Surface Roughness during Machining LM6 Aluminum MMC on WEDM |
|
| | Jay M. Pujara,Kartik D. Kothari,Ashish V. Gohil | | | Advanced Engineering Forum. 2017; 20: 42 | | | [Google Scholar] [DOI] | | 3 |
WEDM process variables investigation for HSLA by response surface methodology and genetic algorithm |
|
| | Neeraj Sharma,Rajesh Khanna,Rahul Dev Gupta | | | Engineering Science and Technology, an International Journal. 2014; | | | [Google Scholar] [DOI] | | 4 |
Parametric optimization and modelling of rough cut WEDM operation of pure titanium using grey-fuzzy logic and dimensional analysis |
|
| | Rupesh Chalisgaonkar,Jatinder Kumar,Zude Zhou | | | Cogent Engineering. 2014; 1(1): 979973 | | | [Google Scholar] [DOI] | |
|