Home | About us | Editorial board | Search | Ahead of print | Current issue | Archives | Submit article | Instructions | Subscribe | Contacts | Advertise | Login 
  Official website of M M University Mullana      
   

    Article Cited by others

ARTICLE

An Improved Approach for the Global Positioning System Geometric Dilution of Precision Classification

Anisheh Seyed Mahmoud, Malekzadeh Milad, Saraf Morteza, Khosravi Alireza

Year : 2013| Volume: 3| Issue : 1 | Page no: 1-5

   This article has been cited by
 
1 Kinetic Study of Thermal Degradation of Hazardous Organic Compounds in Different Atmospheres
Haiping Xiao,Yu Ru,Dahai Yan,Li Li,Xiaowan Sun,Ning Wang,Jie He,Qifei Huang
Environmental Engineering Science. 2017;
  [Google Scholar] [DOI]
2 Study on the Volatilization Behavior of Heavy Metals (As, Cd) During Co-Processing in Furnaces and Boilers
Haiping Xiao,Yu Chen,Li Li,Dahai Yan,Ning Wang,Jie He,Qifei Huang
Environmental Engineering Science. 2016;
  [Google Scholar] [DOI]
3 Comparative assessment of two ceramic cutting tools on surface roughness in hard turning of AISI H11 steel: including 2D and 3D surface topography
A. Khellaf,H. Aouici,S. Smaiah,S. Boutabba,M. A. Yallese,M. Elbah
The International Journal of Advanced Manufacturing Technology. 2016;
  [Google Scholar] [DOI]
4 Municipal solid waste incineration in China and the issue of acidification: A review
Longjie Ji,Shengyong Lu,Jie Yang,Cuicui Du,Zhiliang Chen,Alfons Buekens,Jianhua Yan
Waste Management & Research. 2016; 34(4): 280
  [Google Scholar] [DOI]
5 Comparison between mixed ceramic and reinforced ceramic tools in terms of cutting force components modelling and optimization when machining hardened steel AISI 4140 (60 HRC)
B. Fnides,H. Aouici,M. Elbah,S. Boutabba,L. Boulanouar
Mechanics & Industry. 2015; 16(6): 609
  [Google Scholar] [DOI]
6 Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology
H. Aouici,H. Bouchelaghem,M. A. Yallese,M. Elbah,B. Fnides
The International Journal of Advanced Manufacturing Technology. 2014;
  [Google Scholar] [DOI]

 

Read this article