| 1 |
Post-Processing of NiTi Alloys: Issues and Challenges |
|
|
| N. Sharma,K. Kumar,V. Kumar |
|
| Powder Metallurgy and Metal Ceramics. 2018; 56(9-10): 599 |
|
| [Google Scholar] [DOI] |
|
| 2 |
A Review of Selective Laser Melted NiTi Shape Memory Alloy |
|
|
| Zhong Khoo,Yong Liu,Jia An,Chee Chua,Yu Shen,Che Kuo |
|
| Materials. 2018; 11(4): 519 |
|
| [Google Scholar] [DOI] |
|
| 3 |
An Efficient Social Spider Optimization for Flexible Job Shop Scheduling Problem |
|
|
| S. Kavitha,P. Venkumar,N. Rajini,P. Pitchipoo |
|
| Journal of Advanced Manufacturing Systems. 2018; |
|
| [Google Scholar] [DOI] |
|
| 4 |
Multi-objective optimization of micro-electrical discharge machining of nickel-titanium-based shape memory alloy using MOGA-II |
|
|
| Mustufa H. Abidi,Abdulrahman M. Al-Ahmari,Usama Umer,Mohammed Sarvar Rasheed |
|
| Measurement. 2018; 125: 336 |
|
| [Google Scholar] [DOI] |
|
| 5 |
Mechanical characteristics and bioactivity of porous Ni50-xTi50Cux (x?=?0, 5 and 10) prepared by P/M |
|
|
| Neeraj Sharma,Kamal Kumar |
|
| Materials Science and Technology. 2017; : 1 |
|
| [Google Scholar] [DOI] |
|
| 6 |
An Investigation of the Micro-Electrical Discharge Machining of Nickel-Titanium Shape Memory Alloy Using Grey Relations Coupled with Principal Component Analysis |
|
|
| Mustufa Abidi,Abdulrahman Al-Ahmari,Arshad Siddiquee,Syed Mian,Muneer Mohammed,Mohammed Rasheed |
|
| Metals. 2017; 7(11): 486 |
|
| [Google Scholar] [DOI] |
|
| 7 |
Physical and Tribological Characteristics of Porous NiTi SMA Fabricated by Powder Metallurgy |
|
|
| Neeraj Sharma,Tilak Raj,Kamal Kumar Jangra |
|
| Particulate Science and Technology. 2016; |
|
| [Google Scholar] [DOI] |
|
| 8 |
Porosity exploration of SMA by Taguchi, regression analysis and genetic programming |
|
|
| Neeraj Sharma,Kamal Kumar,Tilak Raj,Vinod Kumar |
|
| Journal of Intelligent Manufacturing. 2016; |
|
| [Google Scholar] [DOI] |
|
| 9 |
3D printing of smart materials: A review on recent progresses in 4D printing |
|
|
| Zhong Xun Khoo,Joanne Ee Mei Teoh,Yong Liu,Chee Kai Chua,Shoufeng Yang,Jia An,Kah Fai Leong,Wai Yee Yeong |
|
| Virtual and Physical Prototyping. 2015; 10(3): 103 |
|
| [Google Scholar] [DOI] |
|
