Home | About us | Editorial board | Search | Ahead of print | Current issue | Archives | Submit article | Instructions | Subscribe | Contacts | Advertise | Login 
  Official website of M M University Mullana      
   
This article has been cited by
1Parameter study and optimization of WEDM process: A Review
Md Ehsan Asgar,Ajay Kumar Singh Singholi
IOP Conference Series: Materials Science and Engineering.2018;404()012007
[DOI]
2Wire electrical discharge machining of AA7075/SiC/Al2O3 hybrid composite fabricated by inert gas-assisted electromagnetic stir-casting process
Shyam Lal,Sudhir Kumar,Z. A. Khan,A. N. Siddiquee
Journal of the Brazilian Society of Mechanical Sciences and Engineering.2014;36(2)335
[DOI]
3Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory
Rajesh Khanna,Anish Kumar,Mohinder Pal Garg,Ajit Singh,Neeraj Sharma
Journal of Industrial Engineering International.2015;11(4)459
[DOI]
4An experimental parametric analysis on performance characteristics in wire electric discharge machining of Inconel 718
K Venkatarao,T Anup Kumar
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.2019;233(14)4836
[DOI]
5Material Removal Rate, Electrode Wear Rate, and Surface Roughness Evaluation in Die Sinking EDM with Hollow Tool through Response Surface Methodology
Teepu Sultan,Anish Kumar,Rahul Dev Gupta
International Journal of Manufacturing Engineering.2014;2014(14)1
[DOI]
6Active magnetic bearing design study
Gabriele Barbaraci,Gabriele Virzě Mariotti,Alessio Piscopo
Journal of Vibration and Control.2013;19(16)2491
[DOI]
7Study of the reuse potential of the sisal fibers powder as a particulate material in polymer composites
Kátia Moreira de Melo,Thiago Felix dos Santos,Caroliny Minely da Silva Santos,Rubens Tavares da Fonseca,Nestor Dantas de Lucena,José Ivan de Medeiros,Marcos Silva de Aquino
Journal of Materials Research and Technology.2019;8(5)4019
[DOI]
8Experimental investigation of kerf of Ti6Al4V exposed to different heat treatment processes in WEDM and optimization of parameters using genetic algorithm
Mehmet Altug,Mehmet Erdem,Cetin Ozay
The International Journal of Advanced Manufacturing Technology.2015;78(9-12)1573
[DOI]
9Modeling and control of a quadrotor with variable geometry arms
Gabriele Barbaraci
Journal of Unmanned Vehicle Systems.2015;3(2)35
[DOI]
10Modeling and Parametric Investigation of WEDM for D-2 Tool Steel Using RSM and GA
Neeraj Sharma,Neeraj Ahuja,Sorabh Gupta,Ajit Singh,Renu Sharma
Applied Mechanics and Materials.2014;592-594(2)511
[DOI]
11Investigation of Hardox 400 Steel Exposed to Heat Treatment Processes in WEDM
Mehmet Altug
Journal of Polytechnic.2018;592-594(2)511
[DOI]
12Experimental Investigations of the Process Parameters for SKD11 on Wire-cut Electric Discharge Machine
Kumar N,Neeraj Sharma,Neeraj Ahuja,Deepak Matta
i-manager's Journal on Mechanical Engineering.2014;4(1)10
[DOI]
13Experimental Investigations of the Process Parameters for SKD11 on Wire-cut Electric Discharge Machine
K. Jayakumar
i-manager's Journal on Mechanical Engineering.2020;4(1)715
[DOI]
14Investigation of mechanical, microstructural, and machining properties of AISI 420 martensitic stainless steel welded by laser welding
Mehmet Erdem,Mehmet Altug,Mustafa Karabulut
The International Journal of Advanced Manufacturing Technology.2016;85(1-4)481
[DOI]
15Effect of Width of Kerf on Machining Accuracy and Subsurface Layer After WEDM
K. Mouralova,J. Kovar,L. Klakurkova,T. Prokes
Journal of Materials Engineering and Performance.2018;27(4)1908
[DOI]
16Comparison of optimized settings for cryogenic-treated and normal D-3 steel on WEDM using grey relational theory
Rajesh Khanna,Hari Singh
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.2016;230(1)219
[DOI]
17Modelling the WEDM Process Parameters for Cryogenic Treated D-2 Tool Steel by Integrated RSM and GA
Neeraj Sharma,Ajit Singh,Renu Sharma,Renu Deepak
Procedia Engineering.2014;97(1)1609
[DOI]
18Improving the Demulsification Process of Heavy Crude Oil Emulsion through Blending with Diluent
K. K. Salam,A. O. Alade,A. O. Arinkoola,A. Opawale
Journal of Petroleum Engineering.2013;2013(1)1
[DOI]
19Crashworthiness design of multi-component tailor-welded blank (TWB) structures
Fengxiang Xu,Guangyong Sun,Guangyao Li,Qing Li
Structural and Multidisciplinary Optimization.2013;48(3)653
[DOI]
20Design of Methane Hydrate Inhibitor Molecule Using Density Functional Theory
S. Pal,T. K. Kundu
Journal of Cluster Science.2015;26(2)551
[DOI]
21INVESTIGATION OF MACHINABILITY OF WELDED JOINTED HARDOX STEEL IN WEDM
MEHMET ALTUG
Anadolu University Journal of Science and Technology-A Applied Sciences and Engineering.2019;26(2)551
[DOI]
  Feedback 
  Subscribe 

Subscribe this journal
Submit articles
Most popular articles
Joiu us as a reviewer
Email alerts
Recommend this journal