Home | About us | Editorial board | Search | Ahead of print | Current issue | Archives | Submit article | Instructions | Subscribe | Contacts | Advertise | Login 
  Official website of M M University Mullana      
   Ahead Of Print
     Search Pubmed for
    -  Aminu MD
    -  Ardo BU
    Article in PDF


 Article Access Statistics
    PDF Downloaded119    

Recommend this journal


   Table of Contents   Next Article
Ahead of print publication

Using an Operational Tool for Well Test Analysis in Complex Reservoirs

 Department of Geology, Modibbo Adama University of Technology, Yola, PMB 2076, Adamawa State, Nigeria

Correspondence Address:
Login to access the Email id

Source of Support: None, Conflict of Interest: None

DOI: 10.4103/0976-8580.158561



Measurements of pressure, which are taken near the productive interval is usually assumed as the starting point for a transient analysis in the well test. These measurements are largely used in outlining properties of the reservoir rock and the limits of production in the rock formation. In order to figure out this subject, well test scientists have come up with definitions that vary from initial and average pressures in the reservoirs to drill stem test, and to interference in well testing. Very broadly, analysis in well test might include but aren't limited to type curve analysis; nonlinear regression; closed chamber drill stem test analysis; completion design and/or optimization reports; multi-layered analysis; conventional analysis; production analysis; reservoir and/or well performance projections, etc.

Keywords: Pressure, reservoir, well test

How to cite this URL:
Aminu MD, Ardo BU. Using an Operational Tool for Well Test Analysis in Complex Reservoirs . J Eng Technol [Epub ahead of print] [cited 2021 Apr 18]. Available from: http://www.onlinejet.net/preprintarticle.asp?id=158561



  Next Article